Woods rotary mower
Alan
Join Date: Posts: 1 |
1999-09-19 8128
While I'm stuck at work, my wife and sister in law are doing the fun stuff (pasture mowing). They just called me to say the mower blades have stopped turning on my Woods M4 (Billy Goat). PTO shaft is still spinning. They didn''t hear any noises, but say oil is coming out the top (there's a vented fill plug). Anyone know what this might mean? Is there a clutch on this model that may have overheated? I've not seen a shear pin, but they were mowing a seriously overgrown pasture, approx 2 ac. of 18"-24" grass.
Reply to | Quote Reply | Add Photo
Woods rotary mower
gbob
Join Date: Posts: 1 |
1999-09-19 8132
if this is a three blade mower check the belt that runs the blades ....
Reply to | Quote Reply | Add Photo
Woods rotary mower
Alan
Join Date: Posts: 1 |
1999-09-20 8142
Thanks. It is a two blade cutter. I left work and found the problem. Under the top shroud is a shear pin (grade 2 bolt). I replaced that, and we were up and mowing. ....
Reply to | Quote Reply | Add Photo
Woods rotary mower
gbob
Join Date: Posts: 1 |
1999-09-20 8156
just goes to prove that the worst day of repairs is still better than a good day at work!! ....
Reply to | Quote Reply | Add Photo
Go Top
Share This